ISO 1182 Non Combustibility Test Apparatus 900 ℃ Max Temperature

Non-Combustibility Tester

Application

The EN ISO 1182 Non-combustibility test is one of the series of Euroclass test standards. This test specifies a procedure for determining whether or not a material will contribute directly to fire development and is relevant to classification of all building products (including floorings) into classes A1 and A2.

Performance characteristics

• Non-Combustibility Furnace measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element.
• The evaluations (results) are rising temperature in the furnace, basic mass loss and ignition of specimen.
• Single Zone Furnace operable at up to 900 ℃ with the Kanthal Ribbon Heater.
• 750±5℃ temperature automatically control by PID and Power controller.
• Provided with stabilized voltage supply for more quick temperature stabilization.
• Equipped with 3 thermocouples, for temperature in furnace, specimen center, and specimen surface respectively.
• 360 degree rotatable and height adjustable thermocouple scanning device.
• Inner furnace thermocouple device to calibrate the temperature of furnace.

Technical Parameters

• Thermocouples: OMEGA brand
• Insulated thermocouple, wire diameter in 0.3mm, outer diameter in 1.5mm.
• Ribbon Heater: Kanthal brand made in Switzerland
• Furnace Temperature: 750°C
• Tube Dimensions: Inner diameter: 75 mm, height: 150 mm, wall thickness: 10mm.
• 

Airflow stabilizer: 500mm in height, a truncated shaped cone, the top diameter is 75mm, and the bottom opening is 10mm in diameter.

Dimension of Specimen holder: φ1.5mm Steel wire made, inner diameter in 46mm, height in 57mm

The equipment consists of:

• oven
• fume hood
• stand;
• sample holder for solids (at least 2 pcs.);
• sample holder for bulk materials (at least 2 pcs.);
• sample insertion device;
• temperature control (maintenance) and measuring (recording) device;
• data capture and processing software.

All listed equipment meets the requirements of the standard LST EN ISO 1182: 2020

Standards

• BS: BS 476-4
• ISO: ISO 1182 2020
• EN: EN 13501
• IMO: FTPC Part 1

Size

• Furnace: 400 mm (W) x 400 mm (D) x 1200 mm (H)
• Control Unit: 530 mm (W) × 270 mm (D) × 280 mm (H)

Installation Requirements

• Electrical: 110V AC 60Hz / 230V AC 50Hz, 10A
• Ambient Temperature: Operating 10°C to 35°C
• Dimensions: 400 mm (W) x 400 mm (D) x 1200 mm (H)
• Control Unit: 530 mm (W) × 270 mm (D) × 280 mm (H)

Accessories

1. Computer one set
2. Software
3. Thermocouples OMEGA brand
4. Ribbon Heater Kanthal brand made in Switzerland
5. Electric furnace wire